One way to fill a resin shaker with the inside liquid is through the front film. This method is good if you aren't quite sure just yet what your shaker is going to be and don't need/want to drill a hole through the side. All of these steps are after the shaker is already made, filled with the pieces you're putting inside and the top film is already cut to size.
Punch a hole in the film. I used a screw-down hole punch.
It should look something like this. This is a good time to remove any marker from your film or peel off the protective covers if any.
Add UV resin around the edges of the shaker.
Place the film on the shaker on top of the UV resin and cure.
Fill the shaker with the liquid through the punched hole. I used a needle tip bottle and baby oil. At this point, you'll want to move the liquid around inside to check for any leaks, probably before you fill it up all the way. If any, clean them up and seal them with UV resin.
Once the liquid is in, use UV resin to plug the hole. After you dome it the plugged hole is hardly noticeable at all! Just don't make that drop too high.
Once you get this far, the next step is to dome it!
This video shows it all finished with the badge reel hardware attached.
These small acrylic beads are the perfect touch for your crafting projects! They are great for a candy/gumball theme. These beads measure about 2mm and have NO HOLE. They come in a mixed-colored package of 15g (1/2 oz.).
Adorable polymer clay fox pieces for crafting. Pieces measure about 10-11.5mm X 9-11mm X 2mm thick but do vary slightly in size. Included in this package is 15g (1/2 oz).
Blue polymer clay heart pieces for crafting. Pieces measure about 7-11mm X 8-11mm X 2-3mm thick, they do vary slightly in size. You will receive a package that is 15g (1/2 oz).
Pink, Red & White polymer clay heart pieces for crafting. Pieces measure about 4-5mm X 4mm X .3-2mm thick, they do vary slightly in size. You will receive a package that is 15g (1/2 oz).
Multi-colored polymer clay heart pieces for crafting. Pieces measure about 3.5-5mm X 4-5mm X .5-2mm thick, they do vary slightly in size. You will receive a package that is 15g (1/2 oz).
Super adorable rainbow theme flatback cabochons. They are so fun and so adorable you'll want to use them in all of your projects! Great for jewelry making, bow making, and more.
Pieces measure 24.5 mm X 12.5 mm by 5.5 mm thick.
Super cute unicorn theme flatback cabochons. They are so fun and so adorable and ready to use in your projects!
Pieces measure between 27 mm X 16 mm by 7mm thick.
